Welder—DC Stick 40 - 250 amp - 225 amp 60% duty cycle Generator—5000 watt continuous 60 Hz (while not welding)
> One 120 volt, 20 amp duplex outlet
> One 120 volt, 30 amp twist lock outlet
> One 240 volt, 20 amp twist lock outlet Air Compressor—Single stage, 23 CFM @ 100 PSI, 150 PSI max. Jump Starting—12 volt nominal, 700 amp, 24 volt nominal, 400 amp Engine—Electric start, air cooled Kohler Command OHV V-Twin Dimensions—Unit with fuel tank: 38"W x 50"D x 25"H Control box: 18"W x 5"D x 12"H Bottom of unit to bottom of control box: 10" Weight—850 lbs.
Includes 6 gallon side mount fuel tank (removable)
Optional 13 gallon back mount fuel tank changes
overall dimensions to: 42"W x 46"D x 26"H
GPC 5000
DC Welding
CC stick
25 ft. 1/0 gauge welding cables included
AC Power
Synchronous, brushless generator
Limited AC output while welding
Air Power
CFM rated at 100 PSI, 150 PSI max.
Air gauge on control panels monitors air tank pressure Air tank required (not included)
Jump Starting
Voltage regulator with reverse polarity protection controls output voltage to a safe level for today's electronics
Surge protection with Antizap provides safer boosting
Polarity and low battery LED indicators confirm proper connections
12 volt nominal, 700 amp
24 volt nominal, 400 amp
30 ft., 1/0 ga. welding cable allows for flexibility and ease of use
1000 amp clamps allow maximum amperage output
Control Panel
Control panel mounted to unit is standard
Plug and play feature of control panel for easy remote mounting Requires extension harness for distances beyond 12" (see options)
Available Options
950-087 6 ft. Control Panel Harness
950-088 12 ft. Control Panel Harness
950-153 18 ft. Control Panel Harness
250-022L 13 Gallon Rear Mount Fuel
Tank Upgrade (factory installed) from standard 6 gallon side mount
350-087 50 ft. Welding Cable Upgrade
450-044 50 ft. Boosting Cable Upgrade 550-056 30 CFM Air Compressor Upgrade
Accessories
61-130 30 gallon Vertical Mount Air Tank
61-131 30 gallon Horizontal Mount Air Tank
50-443 12 gallon Horizontal Mount Air Tank Air tank required (not included)
Installation
Goodall Power Centers provide for a compact and clean installation. Installation time is reduced and simplified with these easy bolt-in packages, compared to the installation of separate components.